Co2 Laser Machine Accesories

Product Details:

Other Details:

The case is made of high-quality ZL 102 aluminum alloy with streamline design,heat-dissipation is more effective.

Driven by an electrical magnetic motor, adopt the straight-line reciprocal motion to produce air and more reasonable in structure.

Adopt SF3 new type of wearable material for the cylinder and piston, which is of low power consumption, large air output, and high air pressure.

Non-oil lubricating design, the compressed air is purified.

Product Details:

Mechanical Laser Parts Set

Brand:TechnoSize: 600mm*400mm / 900mm*600mm / 1300mm*900mm / 1400mm*1000mm / 1600mm*1000mm Model:Single Head / Double Head

 

Product Details:

20MM and 25MM CO2 Laser Machine Mirror

Product Details:

24V DC Water Pump For CW5000 And CW5200 Water Chiller

Product Details:

II-VI Infrared ZnSe Focus Lens

For Co2 laser cutting & engraving machine

Diameter: 19.05mm & 20mm

Focal length: 50.8mm/2in, 63.5mm/2.5in, 101.6mm/4in

Material : ZnSe (imported material from the U.S.)

Wavelength : 10.6um

Diameter Tolerance : +0/-0.13mm

Thickness Tolerance : +0.25mm/-0.25mm

FL Tolerance : +2%/-2%

Centration : < 3 arc minutes

Clear Aperture : >90%

Surface Figure : < 1" Dia

Surface Quality : 40-20 scratch and dig

AR/AR coating : R<0.5 per Surface @ 10.6um or 9.4um 

Product Details:

 

Ruida RDC6442G/S system is a new generation system for 4-Axis control of laser engraving and cutting. 

• Digital Laser Control Signals:

(1) TTL level output, 50 mA, Drive Capability
(2) PWM frequency 2K-50K for adjustable
(3) PWM duty ratio is 1% ~ 99%, adjustable
(4) PWM value is up to 5.0 V

• One-Way 24V Power Supply, >2A

• Motor Control Signal: Common-anode Output, Drive Capability 20 mA. Motor control pulse frequency: Max.500KHZ

• 10/100M Ethernet + USB 2.0 Control.

• Interpolation: Linear/circular arc/B spline, accuracy + / - 0.5 pulse

• Output: 4-channel, photoelectric isolated OC gate output, the max. drive capability 500mA drive capability (with follow-current protection).

• Input: 4-channel, photoelectric isolated input, compatible with 5V/ 12V / 24V logic level

• 6442G: Standard / 6442S: Double Head Linkage

Product Details:

Additional Information:

• Delivery Time: 10-15 Days
• Packaging Details: Paper Box

Product Details:

Brand - RuidaController - RD6442G And RD6442S Support

Additional Information:

• Production Capacity: 50 Pieses
• Delivery Time: 10-15 Days
• Packaging Details: Paper Box

Product Details:

220V 550W Dust/Smoke Exhaust Blower Fan for CO2 Laser Engraving Cutting Machine  The exhaust fan is typically used for mechanical equipment. Because when the laser machine is working, it can produce smoke or smell (smell different product by different materials), so user need to use the exhaust fan to extract the smoke and smell out of room. Ensure a comfortable indoor environment. Specification: Voltage: 220V 50Hz Material: iron shell iron impeller Fan inlet diameter: 150mm Fan outlet diameter: 150mm Fan Pressure: 2200Pa Flow: 880m³/h(14.8m³/h) Speed: 2800r/min Noised:

Product Details:

Features:

1. Lift:3.2m
2. Flow:3000L/H
3. usage with 40w/60w/80w laser tube.
4. the water sensor set should be connected to "WP" and "G" of laser power supply.
5. when water was blocked,the laser power will stop working.
6. Pipe Booster Pump Flow Switch Carries Out on-off Control Over Sensing Elements through a Water Flow Type Magnetic Control Device, Thus Achieving the Effects of Starting and Shutting Down Water Pumps.
7. This water Flow Switch is to Protect the Laser Tube. When the Water Pump is not Working, the Water Sensor will Detective, and Shut Down the Laser Machine. So the Laser Tube will not be broken.